1967 Chevrolet Camaro 2 Door Hardtop

Stock #3670
SOLD
Unknown
Showroom
0
Mileage
Hardtop
Body Style
Automatic
Transmission
cylinders 454 LS7
Engine
··· 129056
VIN
Not Specified
Exterior
/
Interior
image backdrop

Engine - Custom Built by BDS to create a streetable beast (on pump gas) LS7 454 bored to 468 cubic inches and fitted with a Steel Crank, LS7 Polished Rods, Ross 6.5:1 Pistons, BDS Cam, Milodon Gear Drive and Oil Pump and a Stock Wet Sump Oil Pan. BDS Ported and Polished the Cylinder Heads and installed Bronze Guides. BDS used their 6:71 Blower with Twin Holley 990 Double Pumper Carbs and an MSD 7AL Electronic Ignition and Distributor. Custom designed Headers and Mufflers flowing through a 3.5" Exhaust to create the perfect blend of deep, authoritative tone without being harsh.

Transmission - Custom Built by Sunco, Turbo 400 with 2500 Stall Converter, B&M Pro Stick Shifter. Strong, positive shifts without typical jerkiness of off-the-shelf shift kits.

Safety - Art Morrison 2x3 inch Milled Steel Frame, 12 pt Roll Cage and RCI 5 pt harness, trunk mounted Gel Battery and a Jaz 16 Gallon Fuel Cell.

Suspension - Avo Coilover Suspended Nine Inch with 4.11 Geared Ford Rear-End housing Moser Axles and a Spool. Art Morrison Steel Tubs and enormous 33x21.50x15 Tires on 15x15 Wheels. Morrison Ladder Bars and a Panhard Bar keep the car straight. Front-End has Power Assisted Steering and Disc Binders, Classic Pro Street sized 15x3.5 Wheels and SR165 Tires.

Body - Trick, Tilt Front-End was custom welded together into one unified piece. The nose tilts to expose the awesome BDS Powerplant and the front-molded frame, smoothed firewall and custom A-Arms (the relocated master cylinder resides under the dash using a bell crank) The rear fender wells were stretched a full five inches to create the perfect proportions while still accommodating the massive rear rubber. Custom Award Winning Black, Blue and Magenta Paint on the Camaro's silky smooth body that was discovered to be factory rust free metal after stripping down to the basics.

Interior - Custom High-Grade cloth over Prelude seats and finishing the floors with quality Essex Carpeting. The Auto Meter Pro Comp Gauges are perfectly installed for function and aesthetics and in case the wife wants to cruise, amenities include Power Steering, Tilt Wheel and AM/FM Cassette.


Legal Disclosures: Specialty Sales Classics has advertised and sold thousands of classic cars since our founding in 1978. We strongly encourage any and all buyers who are unable to view the vehicle in-person to perform a Pre-Purchase Inspection (by an independent party of their choosing) prior to the purchase. Given the age of many of our vehicles, it is extremely difficult to adequately describe all aspects of each vehicles condition in the limited space available and we have learned that these Pre-Purchase Inspections are helpful to all parties involved.

The information presented for this vehicle is deemed reliable, but is not guaranteed as a basis of purchase. The Buyer should make a thorough, independent inspection and investigation of the vehicle prior to purchase.