1965 Shelby Cobra CSX4000 Series 427 S/C

Exceptional '65 Shelby Cobra CSX4929 427 S/C Roadster finished in stunning Ferrari Red over Black Interior, Powered by its cast-iron 427 FE V8 putting out 425hp! TREMEC 5 Speed Manual Transmission, Listed in the Shelby American World Registry, California SB100 Smog Exempt, Only 160 miles, Looks and sounds amazing!

The CSX 4000 Series 427 S/C component vehicles from Shelby Automobiles, Inc. are everything the 1965 models were and more. The authenticity of each vehicle is documented by Shelby CSX numbers and a manufacturer's Statement of Origin (MSO) from Shelby American signed by Carroll Shelby himself. Improvements include a stronger steel frame and better alloys used in the components, plus better cooling and additional heat shielding to make these cars safer and more drivable without losing any of their original character. With 0-60 MPH under four seconds, and 12 second quarter mile performance, you'll know exactly what it's like to drive a true American legend.

Options and Accessories:

• Steel Tube Chassis
  
  
• 4-inch diameter main frame rails, of drawn-over-mandrel round steel tube with .125-inch wall thickness (wall thickness on the '60s 427 S/C Cobra was .095 inches)
• 1 1/2-inch tubular steel cowl hoop with .120-inch wall for mounting steering column, windshield, dashboard and door hinges
• 1 1/4-inch tubular steel cowl hoop for door latches and rollbar
• 3/4-inch tubular steel framed hood and trunk lid for hinges and latches to attach
• 1 1/2-inch chromed steel rollbar assembly with rear brace
• Racing-style quick-jack bumpers (4) and mounting hardware
  
  
• Engine Compartment
  
  
• 427 FE headers and sidepipes
• 9: to 1 Compression
• Diamond Forged Pistons
• Throttle pedal and linkage assembly
• Large capacity aluminum radiator and dual electric fans
• Wiring harness with fuse box and starter solenoid
• Electrical relays for all accessories (headlights, taillights, wiper motor, fuel pumps, etc.)
  
  
• Fuel System
  
  
• 20-gallon fuel cell with filler neck, LeMans "flip-up" cap, pickups, twin electric pumps and 3/8-inch lines to engine compartment
• A 42-gallon fuel cell is optional
  
  
• Suspension, Brakes and Steering
  
  
• All suspension members are Shelby-proprietary, no kit car pieces used
• Custom Shelby aluminum-Salisbury differential housing for the dana differential gears with two Spicer splined halfshaft axle assemblies, a 3.54:1 ratio is standard
• Custom cast Shelby front and rear uprights, drive hubs, dual A-arms, and Shelby proprietary coil-over shocks
• Steering rack assembly with spacers, U-joints, tie rod ends, column, and mounting hardware
• Brakes including master cylinders, pedal assembly front and rear calipers, rotors, connecting lines, fittings and emergency brakes with cables and handle
  
  

Financing available up to 144 months O.A.C. International buyers welcome! Worldwide shipping available to anywhere in the world. We are the oldest and largest classic car dealership on the West Coast. Marketing Classic, Exotic and Performance cars worldwide for over 25 years! Additional photos and video available upon request.

• Back To Top